How to use TVT IP tool for TVT IP Camera? TVT provides a good IP tool called TVT IP tool. Using this tool you change the default IP TVT camera. This is a free tool that you can use it to the setup of TVT IP camera. Before starting how to use TVT IP tool, you should know about TVT IP camera. TVT IP camera (short for IP-CAM) is designed for high-performance CCTV solutions.TVT  It adopts state of the art video processing chips. It utilizes most advanced technologies, such as video encoding and decoding technology, complies with the TCP/IP protocol, SoC, etc to ensure this system more stable and reliable. TVT IP camera is widely used in banks, telecommunication systems, electricity power departments, law systems, factories, storehouses, uptowns, etc. In addition, it is also an ideal
the choice for surveillance sites with middle or high risks.

Download TVT IP Tool

TVT IP camera default IP address

The default IP address of this camera is 192.168.226.201

TVT camera default Username

The default username is “admin”.

TVT Camera default password

The default password is “123456”.

Step 1. Download TVT IP Tool

Before taking any step you should have to install IP camera tool. Download here. This is a secure way to download IP tool. Setup size is 14MB, so it does not take time. After downloading, Double click on the setup and install it on your computer. Now move to next step.

Step 2. Open IP tool

Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC.  Double click the IP-Tool icon on the desktop to run this software as shown below.

TVT IP tool

Step 3. Modify IP address 

Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the information of the camera listed in the above table to show the network information on the right hand. Modify the IP address and gateway of the camera and make sure its network address is in the same local network segment as the computer’s. Please modify the IP address of your device according to the practical situation

For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera shall be changed to 192.168.1.X. After modification, please input the password of the administrator and click “Modify” button to modify the setting.

Step 4. Open IP Camera

Double click the IP address and then the system will pop up the IE browser to connect IP-CAM. IE browser will auto download the Active X control. After downloading, a login window will pop up as shown below. Input the username and password to log in.

The default username is “admin”; the default password is “123456”.

Step 5. Finalise

After putting IP address, IE asks to install an ActiveX component. How to install ActiveX. Install it. Now put the username and password and press login button. All done, you got the live preview of the camera.

TVT ip camera tool

We hope you got some information about how to use TVT IP camera tool. If you have any question or suggestions please mention in the comment box.

Please follow and like us:
Author

Leave a Reply

Open

Close

Enjoy this blog? Please spread the word :)