When you open the box of any camera, DVR, NVR, or any other IP-based device, the first thing that comes to mind is the default IP address and password.
Hence, this article is all about the default CCTV password.
So this article is not limited to a particular “CCTV default password“; it covers almost all the brands, but if a few brands are missing, kindly mention them in the comments. I try to cover almost all IP addresses and passwords, but a few products have a unique code that will be mentioned in their user manual.
CCTV Default Username, Password, and IP Address Table
Here’s a list of default usernames and passwords for top CCTV brands. These are the factory credentials that come with a brand-new camera or NVR right out of the box. If you just bought a camera and need to set it up, you can use this list to quickly look up its default IP address, username, and password.
| Sn | Brand | Default Username | Default Password | Default IP Address |
|---|---|---|---|---|
| 1 | Hikvision | admin | 12345 (older) / Activation Required | 192.0.0.64 |
| 2 | HiLook | admin | Activation Required | 192.0.0.64 |
| 3 | Dahua | admin | admin | 192.168.1.108 |
| 4 | CP Plus | admin | admin | 192.168.1.108 |
| 5 | Uniview (UNV) | admin | 123456 | 192.168.1.13 |
| 6 | Reolink | admin | (blank) | DHCP |
| 7 | Annke | admin | 12345 | 192.0.0.64 |
| 8 | TVT | admin | 123456 | 192.168.1.10 |
| 9 | Provision-ISR | admin | 123456 | 192.168.1.250 |
| 10 | Vivotek | root | root | 192.168.0.99 |
| 11 | Foscam | admin | (blank) | DHCP |
| 12 | Amcrest | admin | admin | DHCP |
| 13 | Lorex | admin | 000000 | 192.168.1.108 |
| 14 | Swann | admin | 12345 | DHCP |
| 15 | Axis | root | pass | 192.168.0.90 |
| 16 | Hanwha Wisenet | admin | 4321 | 192.168.1.100 |
| 17 | Bosch | service | service | 192.168.0.1 |
| 18 | Avtech | admin | admin | 192.168.1.10 |
| 19 | Geovision | admin | admin | DHCP |
| 20 | Q-See | admin | admin | 192.168.1.100 |
| 21 | Zosi | admin | (blank) | DHCP |
| 22 | Night Owl | admin | admin | DHCP |
| 23 | EZVIZ | admin | Activation Required | DHCP |
| 24 | Imou | admin | Activation Required | DHCP |
| 25 | TP-Link VIGI | admin | Activation Required | DHCP |
| 26 | Milesight | admin | ms1234 | 192.168.5.190 |
| 27 | Tiandy | admin | 1111111 | 192.168.1.2 |
| 28 | Guarding Vision | admin | Activation Required | DHCP |
| 29 | XMeye DVR | admin | (blank) | 192.168.1.10 |
| 30 | Panasonic | admin | 12345 | 192.168.0.10 |
| 31 | Sony SNC | admin | admin | 192.168.0.100 |
| 32 | ACTi | Admin | 123456 | 192.168.0.100 |
| 33 | Pelco | admin | admin | 192.168.0.20 |
| 34 | Arecont Vision | admin | (blank) | 192.168.0.100 |
| 35 | Honeywell | admin | 1234 | 192.168.1.100 |
| 36 | Infinova | admin | admin | 192.168.1.200 |
| 37 | Brickcom | admin | admin | 192.168.1.1 |
| 38 | Speco Technologies | admin | 1111 | DHCP |
| 39 | FLIR | admin | fliradmin | DHCP |
| 40 | Ubiquiti UniFi Protect | ubnt | ubnt | DHCP |
Common Default IP Addresses
Some CCTV devices use fixed factory IP addresses.
| IP Address | Common Brands |
|---|---|
| 192.0.0.64 | Hikvision, HiLook, Annke |
| 192.168.1.108 | Dahua, CP Plus, Lorex |
| 192.168.1.13 | Uniview |
| 192.168.1.10 | TVT, XMeye |
| DHCP | Reolink, EZVIZ, Imou, Foscam |
Common Default IP Addresses
Some CCTV devices use fixed factory IP addresses.
| IP Address | Common Brands |
|---|---|
| 192.0.0.64 | Hikvision, HiLook, Annke |
| 192.168.1.108 | Dahua, CP Plus, Lorex |
| 192.168.1.13 | Uniview |
| 192.168.1.10 | TVT, XMeye |
| DHCP | Reolink, EZVIZ, Imou, Foscam |
If you cannot access the device, use an IP Scanner or the manufacturer’s discovery tool.
So below is the list of CCTV default passwords and Usernames.
1. Hikvision Default Password and IP address
Hikvision one of the best CCTV camera brands all over the world, and it has many customers around the world. Sometimes they need to know the default password for Hikvision devices. Here is the default password for Hikvision devices.
Username: admin
Password: 12345
IP address: 192.0.0.64/192.168.1.64
IP Tool: Download SADP Tool
For new models, you can reset the password via the SADP tool. Please click the link below and follow the instructions in the PDF file
Hikvision password resetting guide
CP Plus CCTV Default Password
Username: admin
Password: admin
IP Address: 192.168.1.108 / 192.168.1.240
2. Dahua default IP address and password
Dahua default IP address is in the series of 192.168.1.XXX, and if you need to change the IP address, then you need to follow the link below: “How to change Dahua IP address“.
Username-admin
Password-admin
For DVR and NVR, following are the default accounts:
- admin/admin admin/123456 (master account of local and network accessing)
- 888888/888888 (local administrator)
- 666666/666666 (restricted user)
- default / default (hidden user)
3. CP Plus IP camera default IP address
User name: admin
Password: admin
IP Address : 192.168.1.108 / 192.168.1.240
CP PLUS IP camera address finder tool
If cameras being used on 3rd party recorders or you need to configure a large number of cameras. The first step will be to use the Tools to find and configure the IP address and the local area network. Here is the link to the CP PLUS IP camera address finder tool.
4. Axis camera default IP
Axis camera User name: root
Password: pass
default IP: 192.168.0.90
5. Bosch camera default IP
For old models:
Username: service
Bosch IP camera default password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 8 seconds.
6. GEOVISION default password
Username: admin
Password: admin
IP Address: 192.168.1.108
7. TVT IP camera default IP
DVR and NVR
Username: admin
Password: 123456
IP Address: 192.168.226.201
IP Camera
Username: admin
Password: 123456
IP Address: 192.168.226.201
8. Gobbler default IP address and password
Username: admin
Password: 123456
9. Panasonic default IP address and password
User name: admin
Password: 12345
IP Address: 192.168.0.253/10.1.1.12/192.168.0.10
10. SONY default IP address and password
Username: admin
Password: admin
IP Address: 192.168.0.100
11. Samsung default IP address and password and Samsung DVR default password
User name: admin
Password: 4321/111111/1111111
IP Address: 192.168.1.200
12. Ubiquiti default password
Username: ubnt
Password: ubnt
IP Address: 192.168.1.20
13. Mobotix camera default password.
Mobotix:
Username: admin
Password: meinsm
14. Messoa default IP address and password
Username: admin
Password: 1234 or model number of camera or
IP address: 192.168.1.30
15. LTS Security default IP address and password
Username: admin
Password: 12345/123456
IP Address: 192.0.0.64
16. Speco default IP address and password
Speco
For old models:
Username: root /admin
Password: root/admin/1234
17. Canon default IP address and password
Username: root
Password: camera model number
IP Address: 192.168.100.1
17. Cisco default IP address and password
Username: No Username
Password: No Password
IP Address: 192.168.0.100
18. FLIR default IP address and password
Username: admin
Password: fliradmin
IP Address: 192.168.250.116
19. Foscam default IP address and password
Username: admin
Password: Blank
IP Address: search By IP tool, Click here to download
20. Honeywell default IP address and password
Username: administrator
Password: 1234
IP Address: DHCP enabled
Honeywell IP Utility is a free program that enables users to configure the IP network settings, name device(s), upgrade firmware and change passwords.
21. PELCO default IP address and password
Username: admin
Password: admin
IP Address: DHCP enabled
21. QVIS default IP address and password
Username: Admin
Password: 1234
IP Address: 192.168.0.250
22. SANYO default IP address and password
Username: admin
Password: admin
IP Address: 1192.168.0.2
23. Toshiba default IP address and password
Username: root
Password: ikwb
IP Address: 192.168.0.30
24. 3xLogic default IP address and password
Username: admin
Password: 12345
IP Address: 192.0.0.64
25. Basler default IP address and password
Username: admin
Password: admin
IP Address: 92.168.100.x
26. CNB default IP address and password
Username: root
Password: admin
IP Address: 192.168.123.100
27. DIGISOL default IP address and Password
Username: admin
Password: 888888
IP Address: 192.168.1.10
28. Uniview default IP address and password
Username: admin
Password: 123456
IP Address: DHCP enabled.
Uniview IP camera address finder tool
If cameras being used on 3rd party recorders. The first step will be to use the EZTools software on a PC to find the IP address of the cameras, and then you change it according to your local network. The second step will be to change the camera protocol to ONVIF. Here is the download link of EZ tool.
29. LILIN default IP address and password
Username: admin
Password: 1111
IP Address: 63.110.100.xxx/DHCP Enable
30. Trendnet default IP address and Password
Username: admin
Password: admin
IP Address: 192.168.10.1
I hope this information is helpful to you. If you have any queries, please write to us in the comment box below.
You may also read this.
Sir my DVD IP address is 192.168.1.104.
I lost my password.can u help me in resetting it. It will be appreciated.
My email id is rohitaanchaltinky@gmail.com
Please share you DVR brand
I didn’t find the Hi-Focus brand. Can you update please.
yes…we will update very soon
..
I’m interested in how to telnet as a root using the ip adress, is there any method to crack the root password? I tried hydra on kali linux but i need a txt file contains the most populer root passwords for all dvr’s and nvr’s including the newer versions from all chinees hisilicon chips.. can anyone involve his nose??
i have CINT camera i want default ip address of this camera
Download “ONVIF device manager” and connect your camera using this. It will surely help you if camera support Onvif
hi, i have IRLAB DIR-0704-ECC DVR
Please help me out to reset the password
Contact with your customer support, surely they will help you because we dont have software to generate password.
bonjour comment allez vous
j ai perdu le mot de mon dvr Fos vision 8216 analogique
je cherche de l aide
le mot de passe administrateur
je ne peut pas la configurer sans le mot de passe
Please ask in English. We have a youtube channel also, Please watch videos there.
https://www.youtube.com/c/CCTVDESK
Please Subscribe to our channel also.
Hi i need help may i get default password of fosvision dvr
THANK YOU!
HOW TO SK BOROADBAND CCTV FEAFUALT PASSWORD?
sorry, we know only ccTV.
Plase share HI-Focus Default user name and password
Reset Password type admin in the user name and then click on Retrieve Password. 2. Click on Dynamic Password • Share those details with Technical Support: 9500123850.
I have forgotten password and login ID of Pansonic DVR as not operated for almost 1.5 years. Could you please guide how to reset
Good Day i just bought a 2nd hand surveillance system, the model is TF8604AHD
The person i bought it from cannot remember username or password, i need to factory reset, in order for me to be able to access camera’s via my phone, can you please assist.
Shaun
Of course, I can help guide you through the general steps to perform a factory reset on a surveillance system like the TF8604AHD:
1. Locate Reset: Find the reset button (usually a small hole).
2. Use Paperclip: Insert paperclip, hold reset for 10-15 sec.
3. Disconnect Power: Unplug power while holding reset.
4. Release Reset: Let go of reset button.
5. Reconnect Power: Plug power back in.
6. Wait: Wait a minute for reset to finish.
7. Default Credentials: Use default username and password (check manual).
8. App Access: Install app, log in with defaults, add cameras.
Remember, these steps are general guidelines, and the exact process might vary based on the manufacturer and model of your surveillance system. Please let me Know the the Company of your Camera. If you’re unsure about any step, it’s a good idea to consult the user manual or contact the manufacturer’s support for precise instructions tailored to your model.
I lost my nvr admin password model k9604_w of pre max company……. How can I reset plz
I’m sorry to hear that you’re having trouble with your NVR admin password. Unfortunately, I can’t assist with that. You might want to reach out to the manufacturer’s customer support or consult the device’s manual for instructions on resetting the password. if you send Company, Model Number and Login Screen then may we help you.
Hello please am having issue with ausno ip camera password I can’t change the IP address because it in static always asking of password for change. Pls what can I do?
If you can’t change the IP address of your Ausno IP camera due to a password issue:
Use default credentials or reset the camera to factory defaults.
Check the camera’s manual for reset instructions.
Contact Ausno support for assistance.
Explore tools like SADP for IP discovery.
Access the web interface using the current IP for possible settings adjustment.
Ensure firmware is up to date.
Dear Sirs and Madam,
I have an Alcott Model DVR: DVR 9416 HD, 16CH H265 DVR 1080P, made in Korea. I forgot the login password.
Printed on the main board:
AHB8016T-3521DV100 V2.02B
0287186277
I would like to know its default password and IP address.
Thank you for your enlightenment.
Best regards,
Will try but it is hard for Us, Once we are able to find, will give you definitely.